Description

DHL Shipping for single product purchasing. Multiple packs would be FedEx shipping, for reference only; the actual shipping carrier would depend on the location, address, package dimension, product category, and geographic location.

Features:

* 3 Training Functions with 0-9 Intensity Levels *:

Our dog collar has 3 extremely efficient and safe training modes (beep, vibration, and static shock modes) for you to cultivate a dog’s basic obedience commands and correct your dog’s inappropriate behaviors. The transmitter also features 4 channels to support training 4 dogs simultaneously. In case of a dog’s accidental injury caused by improper intensity, the receiver collar delivers 0-9 beep, vibration, and static shock levels (0 level means off) for you to adjust to fit your pet’s personality. Please start from the lowest level for better accommodation.

* Stable Wireless Dog Fence Mode *:

 Adopt advanced 2.4G frequency technology that consistently provides a more stable and accurate signal transmission from 50 ft to 990 ft than others. No complicated manual pairing operation; they will be automatically paired after power-on, and one transmitter can connect with an unlimited quantity of receiver collars. When your dog is out of range, the collar will trigger a 5S sound, a 5S vibration, and a 6S shock. After 2 cycles of this, we have the “didi” sound, which is emitted until they return to the setting distance. After 5 min of electric shock, it will enter standby mode.

*Rechargeable & Long Standby Time *:

The built-in 2500 mAh rechargeable battery of the transmitter achieves 3-5 days of working after about 3-4 hours of being fully charged. And the 500 mAh rechargeable collar enables up to 15 days of standby time (depending on using frequency) after about 1-2 hours of charging. Comes with a 2-in-1 Type-C charging cable and adapter; can be conveniently charged via PC, phone charger, laptop, or power bank.

* IPX6 Waterproof Collar Receiver *:

 With well-sealed silicone, the training collar emits IPX6 outstanding waterproof performance, offering your pets maximum flexibility during outdoor activities. Make sure that the charging port is well-sealed before the dog runs into water. Reflected strips on the collar make people see your dogs clearly even at night, which effectively keeps your dog safe.

* Wide Applications *:

 The length of the collar can be adjusted from 9.45 in to 27.16 in to fit most sizes of 6-month-old+ dogs between 15 and 120 lbs. A soft woven fabric collar brings a comfortable wearing experience. Smooth contact points with silicone caps rest gently against your pet’s skin to deliver correction when needed.

*Specification*:

• Product Type: Wireless Dog Fence And Training Collar
• Material: ABS; Woven Strap
• Color: Black
• Battery: Transmitter: 3.7V/2500mAh Rechargeable Battery; Receiver: 3.7V/500mAh Rechargeable Battery
• Transmitter Charging Time: 3-4 Hrs
• Transmitter Working Time: 3-5 Days
• Receiver Charging Time: 1-2 Hrs
• Receiver Working Time: Depends on Using Frequency (Standby Time: 10-15 Days)
• Frequency: 2.4G
• Working Function: Beep, Vibration, Shock
• Intensity: 0-9 Levels of Vibration; 0-9 Levels of Shock; 0-9 Levels of Beep (0 Level Means Off )
• Straight Line Radius Options In Wireless Fence Mode:
• Straight Line Radius Options In Training Mode: 350M/1148FT/382Yd
• Support Channel in Wireless Fence Mode: Unlimited
• Support Channel in Training Mode: 4 Channels
• Waterproof Level: IPX6 (Receiver)
• Pet Application: 6 Months+; Weight Between 15 LBS and 120 LBS; Neck Circumference (Under 69cm/27.16in)
• Collar Belt Circumference: 24-69 cm/9.45-27.16 in
• 2-in-1 Type-C Charging Cable Length: About 50cm/19.68in
• Receiver Size Without Contacts: 7.5x4x2.5cm/2.95×1.57×0.98in
• Receiver with Collar Belt Weight: 76 g/0.16 lbs
• Transmitter Size: 11×8.6x3cm/4.33×3.38×1.18in
• Transmitter Weight: 137 g/0.3 lbs
• Package Size: 20*15*5cm/7.87*5.90*1.96in
• Package Weight: 386 g/0.85 lbs

*Package list*:

• 1x Transmitter
• 1x Collar Receiver with Belt
• 1x 2-in-1 Type-C Charging Cable
• 1x Adapter
• 1x Test Bulb
• 2x Long Conductive Silicone Caps
• 2x Short Conductive Silicone Caps
• 2x Long Contact Points
• 2x Short Contact Points
• 2x Screws
• 2x Expanded Screws
• 1x User Manual

Why does The System not Work?

1. The system has entered a self-locking state. You can confirm this issue by looking at the top right corner of the display screen.

 1) If you don’t operate the unit for 1 minute, it will enter the self-locking state. If you want to operate again, you need to       press the “+” and “-” keys at the same time to unlock, or it won’t operate.
2) After 5 minutes, it will automatically extinguish the screen without operation, and you can press any key to wake up.
3) For the code state and self-locking state, any key is useless; it must be unlocked first, if the code state, press the “CH” key for a long time to exit.

2. The collar and system are in low battery and need to be charged.

3. The receiver has been totally immersed in water for a long time without the charging port well sealed. This will cause malfunction.

How can I know the system can work normally?

To ensure the system operates normally, follow these detailed testing steps after referring to the instruction video and user manual. 

Preparations:

Fully charge the transmitter and receiver, then screw in the receiver’s metal contact points (do not attach silicone caps).

1. Power On Devices

• Press the Power Button on both the receiver and transmitter to turn them on.

2. Prevent Transmitter Self-Locking

• Ensure the transmitter does not enter self-locking mode during the test (refer to the manual for unlocking steps if triggered).

3. Enter Dog Training Mode

• Press the Mode Button to switch to Dog Training Mode.

4. Test Beep/Vibration Function (Pairing Check)

• Press the Beep/Vibration Button , use the  +/- Buttons to set the intensity level, then press the Beep/Vibration Button  again.
• Indicator of Success : If the receiver beeps or vibrates, it confirms successful pairing with the transmitter.  

5. Test Shocking Function (with Test Bulb)

• Attach the test bulb to the receiver’s metal contact points.
• Press the  Shock Button , adjust the level with  +/- Buttons , then press  Shock Button  again.
• Indicator of Success : If the test bulb lights up, the shocking function is working properly.

6. Test Wireless Fence Mode (Radius Setting)

• In Dog Training Mode, press the  Mode Button  again to switch to  Wireless Fence Mode .
• Use  +/- Buttons  to set the radius, then place the transmitter in an open area (no obstacles between transmitter and receiver).
• Attach the test bulb to the receiver, carry the receiver, and walk away from the transmitter.
• Indicator of Success : As you walk towards the set radius, the receiver should first beep, then vibrate, and finally shock when crossing the radius.

Key Notes

• Obstacle-Free Environment : Ensure no objects block the signal between the transmitter and receiver, as this may disrupt communication.
• Test Bulb Requirement : Always use the test bulb when testing the shock function to avoid accidental stimulation.
• Refer to Manual : If issues arise, revisit the user manual and the instruction video.
• Friendly Reminder:
  1. Proper fit of the collar is important! A collar worn for too long or made too tight on the pet’s neck may cause skin irritation. The receiver collar should fit snugly yet be sufficiently loose to allow one finger to fit between the strap and your pet’s neck.
  2. Please make sure to use the conductive silicone set, this will protect the dog’s skin to a certain extent, but it does not affect the electric shock function.
  3. Avoid leaving the collar on the dog for more than 18 hours per day. If possible, reposition the collar on the pet’s neck every 1 to 2 hours.
  4. We suggest not using the shock function except in an emergency. When using the shock function, Level 1 should be tried first and then the level should be gradually increased as necessary.
  5. If the collar is too long, please cut off the excessive portion. It is pretty easy to get a burn edge after the cut. Use a lighter to melt the burr edge.
  6. If your dog has thick hair on the neck, please use longer screw caps.
  7. Use the electric shock to test the bulb.

Actual Product Photo